Yoko Technology 4CH MJPEG DVR Bedienungsanleitung Seite 1

4CH MJPEG DVR U S E R M A N U A L

9 6.2 Rear Panel (1) RJ45: Internet connection terminal. (2) USB: Connect to external USB storage device (Plug and Play). (3) Video Input [

107. OPERATING PROCEDURE 7.1 Power On After power on, DVR will auto-detect its peripherals (self-testing, auto detects the hard disk, and etc.)

11 7.3 Record Mode Note:CH1: No block figure next to CH1 indicates that it is not recording. EACH: Record Type QUAD: Record Ty

127.4 Playback Mode >01 TIME Total 7 >07

138. SYSTEM SETUP 8.1 Menu (1) MAIN MENU: Item subject (First menu layer does not have a subject). (2) Menu Layer Indication: The devi

148.2 System Setup 1. Cursor (>) position indicates the current function selected. 2. Press《▲》and《▼》button to move the cursor. 3. Press《►

158.2.1 Time Setup 1. Cursor (^) position indicates the current time and date selected. 2. Use《▲》or《▼》button to move the cursor. 3. Use《►》bu

168.2.2 Password Setup 1. Cursor (>) position indicates the current function selected. 2. Use《▲》and《▼》button to move the cursor to the desir

178.2.2.1 Change Password 1. Press《►》button to show the display above. 2. Enter the current password (CURRENT PASSWORD). 3. Enter new password

188.2.3 Load Default 1. Press《►》button to show the display above. 2. Press《►》button the message《ALL SETTING DATA IS INITIALIZED》 will be

1 Content 1. SAFETY PRECAUTIONS... 3 2. INTRODUCTION...

198.2.4 R/C CHECK ID 6. Cursor (>) position indicates the current function selected. 7. Press《▲》and《▼》button to move the cursor. 8. Press

208.3 Camera Setup 1. Cursor (>) position indicates the current function selected. 2. Press《▲》and《▼》button to move the cursor. 3. Press《►》b

217. When proceeding “CH1 TITLE”, press《►》button to show the display below: V

221. Cursor (>) position indicates the current function selected. 2. Press《▲》and《▼》button to move the cursor to the desired item. 3. Press《►》

238.4 Record Setup 1. Cursor (>) position indicates the current function selected. 2. Use《▲》and《▼》button to move the cursor to the desired i

249. MOTION RECORD FRAMERATE: Press《►》button to setup different recording speeds per channel, suitable when the recording speed under sch

255. T: Time, indicates continuous record. 6. A: MOTION When motion has been detected, it will be recorded by “Motion Record Speed”. 7

268.5 Buzzer Setup 1. Cursor (>) position indicates the current selected position. 2. Press《▲》and《▼》button to move the cursor to the desired

278. HDD FULL ALERT: Press《►》button to setup “ON” or “OFF”, whether to trigger the alarm when hard disk is full (this setup is only active wh

288.6 Event List 1. Cursor (>) position indicates the current function selected. 2. Press《▲》and《▼》button to move the cursor to the desired i

2 10. NETWORK REMOTE CONTROL (Optional) ... 38 10.1 Network DVR Setup ...

298.6.1 TIME SEARCH 1. TIME SEARCH: Displays system recording time (begin and end). 2. Press《▲》and《▼》button to select the desired time and da

308.6.2 EVENT SEARCH 1. EVENT SEARCH: Displays all recording events, every page consists of 7 events, and maximum 63 stored events. 2. Press《

318.7 USB SETUP 1. Cursor (>) position indicates the current function selected. 2. Press《▲》and《▼》button to select the desired even

328.7.1 8.7.1 8.7.1 8.7.1 TIME SETUPTIME SETUPTIME SETUPTIME SETUP 1. Cursor (>) position indicates the current function selected. 2.

338.7.1.1 COPY8.7.1.1 COPY8.7.1.1 COPY8.7.1.1 COPY （1）Capacity of the copied data. （2）Time required to make a data copy. （3）Request t

348.7.8.7.8.7.8.7.2222 FORMAT / ERASEFORMAT / ERASEFORMAT / ERASEFORMAT / ERASE （1） When proceeding “FORMAT / ERASE” function, t

358.8 Hard Drive Setup 1. Cursor (>) position indicates the current function selected. 2. Press《▲》and《▼》button to select the desired item. 3

368.8.1 FORMAT/ ERASE 1. When proceeding “FORMAT/ ERASE” function, the above display will be shown. 2. When password entered is correct,

379. REMOTE CONTROL (option) Button Name Description ○1 CHECK ID Remote Control ID ○2 Rewind ○3 Fast Forward ○4 MENU Enter / Exit Menu ○5

3810. NETWORK REMOTE CONTROL (Optional) 10.1 Network DVR Setup Before installing the Network DVR, you need to first setup an IP Address, connect it

3 1. SAFETY PRECAUTIONS WARNING: This symbol is intended to alert the user to the presence of un-insulated “ dangerous voltage”.

3910.1.2 Online without DHCP Server 1. Use IPEdit.exe to find the installed Network DVR. 2. The Internet DVR without IP allocated by DHCP will have

4010.2.1 Online using Intranet or Fixed IP Setup similar to “9.1 Network DVR Setup” . 10.2.2 Online using ADSL (PPPoE) Router Setup similar to “

4110.2.4.1 Install ActiveX Before entering remote connection, please install ActiveX and check your browser setup by following the procedu

42 Start-up ActiveX Control

43The graphic below will be shown when first time installing ActiveX Mode. Please, select “Yes” to accept installation. Download ActiveX Contr

4410.3 Main Display Remote control DVR - Main Menu ○1 Live Display ○2 DVR Control Button ○3 Video Setup ○4 Configuration: Enter detail setup

4510.3.2 View Two types of display method: a. Resizable: Adjustable image size. b. Actual size: The actual image size. 10.3.3 Rota

46 10.3.5 Save Current Picture Select to save live images. 10.3.6 DVR Control Setup Supports DVR remote control function (Please refer to 6-1

4710.3.8 Resolution Setting Network DVR provides six resolution settings. The user can select the quality setting from the “Resolution”

48 Reboot DVR: The system need 20 seconds to reboot the DVR (Rebooting does not effect the recording function).  FirmWare update (

4 2. INTRODUCTION 2.1 Product Introduction The product is perfect for office safety, personnel home security, public environments

4910.4.2.2 New user/ Change Password Enter a new user name and password information to create a new user account, or enter an existing user accou

5010.4.3.2 DHCP The “DHCP” is automatically set as the default network setting of the Network DVR. When a Network DVR is connec

511. Power off Network DVR. 2. Connect Network DVR directly to the ADSL modem (using RJ-45 Ethernet port). 3. Power-up Network DVR. 4. Network DVR

52To setup follow the steps below: 1. Register at DDNS Server: http://www.dyndns.org. 2. Apply domain name. 3. Click the “Enable” button. En

5310.4.5 Firmware Update When new firmware (bin file) is supplied, you may update the new version firmware (bin file) to your PC by f

54Press “here” button (1) to update Firmware. Press “here” button (2) to delete the file. The message below displays the writing progress of

5511. HDD Player Software Description PC Player Software System Requirement ※ OS (Operating System) Windows XP or later. ※ Use your PC to install

563. Software Playback Interface Description A. User Interface Figure 1 When the system detects stored

57 ： Fast Rewind ： Rewind ： Pause Playback ： Forward ： Fast Forward ： Quad split screen display ： CH1 Full Screen Display ： CH2

58 Figure 3 Figure 4

5 3. FEATURES  Video system auto detection Auto detects video input (NTSC/ PAL) and supports combine use of color and b/w cameras.  Supports h

59 Figure 5

60B. Parameter Setup Click “Standard Setup” button to show the graphic display below (Figure 6). User may use “Change” button to setup MYS and JPEG

6112. TROUBLESHOOTING Question Answer Suggested HDD Brand Maxtor, Seagate, and Hitachi.

62 13. SPECIFICATIONS Format NTSC/EIA or PAL/CCIR Compression M-JPEG Input 4CH, BNC Video Output 1 x BNC Resolution 720 x 480 (NTSC)， 720 x 576

63MEMO

6 4. PACKING LIST Check to make sure all of the items shown below are included in your product package. If something is missing, cont

7 5. INSTALLATION Connectors on the Rear Panel Please setup the connection by following the illustration shown below (network is an optional functi

8 6. NAME and FUNCTION of EACH PART 6.1 Front Panel (1) : Record LED indicator. (2) : Rewind button. (3) : Fast forward button.